Douglas fir I/III grade sorted, raw solid wood floorboard 25 × 188 mm

Douglas Fir Solid Wood Plank 25 × 188 mm – Re-sorted I/III, Raw | 3.0–5.0 m

The Douglas Fir Solid Wood Plank 25 × 188 mm combines the natural appeal of softwood with the characteristic appearance of a solid country-style plank. The warm, slightly reddish color and the lively grain of the Douglas fir give the floor a cozy and rustic look.

The re-sorted I/III quality offers a balanced appearance with natural wood features. Knots, color variations, and occasional minor cracks are part of the character of this grade. Re-sorting excludes certain wood defects, creating a rustic yet controlled overall appearance.

With a material thickness of 25 mm and a width of 188 mm, the solid Douglas fir plank is suitable for classic interior wood floors. The available lengths of 3.0 to 5.0 m allow for a generous plank layout with relatively few end joints.

Re-sorted I/III quality – natural wood features

The re-sorted I/III grade is characterized by a lively wood appearance. According to the grading specifications, the following features are permitted, among others:

• Knots: Solidly attached knots up to 40 mm, occasionally up to 50 mm. Black knots up to 30 mm are permitted.

• Knots with missing wood: Up to a maximum of 10% of the knot area is permitted. Missing knots are excluded; existing knot cracks are glued.

• Cracks: Shallow cracks, occasional end cracks, and hairline cracks up to 20 cm are permitted.

• Resin pockets: Occasional resin pockets and resin deposits may occur.

• Color variations: Natural color variations and sapwood are permitted.

• Other wood features: Small bark inclusions and occasional heartwood tubes may occur.

Tree bark on the visible side, stacking slat marks, as well as fungal and pest infestations are not permitted according to the grading description.

The stated requirements refer to the visible side in the delivered condition. Deviations due to grading within the limits specified in the technical data sheet are possible.

Solid country-style plank with a raw surface

The raw surface allows for the individual design of the wood floor. After installation and any necessary surface preparation, the planks can be treated with a suitable parquet oil or varnish.

The 4-sided tongue-and-groove connection allows for a precise fit between the planks. The edges are sharp-edged and ensure a classic, seamless-looking plank layout.

Depending on the subfloor and structural conditions, installation is carried out by full-surface gluing or screwing. The random bond or English bond are suitable installation patterns.

Note: The 25 mm thick Douglas fir solid wood plank is not suitable for installation on underfloor heating.

The Douglas Fir Solid Wood Plank 25 × 188 mm in re-sorted I/III quality is an interesting choice for anyone who prefers a classic plank floor made of solid softwood. The natural color, characteristic knots, and generous plank lengths give the floor an individual appeal.

Please note: The available plank lengths between 3.0 and 5.0 m depend on the current stock or available raw material.